Available in a 12 oz. The item was added to your shop cart. Allow to dry for hours.
Print Thread Rate This Thread. I bought my boat. The one thats corrosion prone.
It differs mainly in the use of the zinc chromate primer. Brush the drive with Alodine 4. My email to the company has gone unanswered.
I would like to know of a preferred method of painting my Mercruiser outdrive lower units, which are aluminum castings. If you are not familiar with sterndrive power on boats, they are the used to transfer power from the boats engine s to the prop s and are usually remain submerged in my case, in fresh water for 6 months each yearor in southern climates, a year or more in salt water. My drives are currently in a shop being bead blasted to remove all paint.
Jon Boats are flat bottom boats manufactured for easy maneuverability in shallow water. The most used material for construction is aluminum, making them lightweight and durable for fishing and hunting. A camouflage paint job is a good idea for hunters using a Jon boat to help blend into the surrounding land and water; choose your favorite color of marine enamel that come in over 15 colors and a higher gloss than camouflage paint.
As with all paint projects, the key is preparation. For recoating paint in good condition, you only need to wet-sand the old paint with grit wet-or-dry paper to provide tooth for the new topcoat. If there is a chance that the outdrive has ever been waxed, wipe the entire surface with a dewaxing solvent before you do any sanding. Where the old paint is bubbled or peeled, you must remove all loose paint along with the underlying corrosion.